Published by automattack, August 6th, 2019

• 12-18 combo straightedge: https://www.stewmac.com/luthier-tools-and-supplies/types-of-tools/straightedges/2-in-1-precision-straightedge/
• Feeler gauges (like these): https://www.amazon.com/Hotop-Blades-Feeler-Imperial-Measuring/dp/B06XHXJG31
• rule, graduated to 64th inch (like this): https://www.amazon.com/Mitutoyo-182-105-Chrome-Tempered-Stainless/dp/B00027958O/
• some sort of neck rest - you can totally improvise this, build your own, or purchase one
• truss rod tool for each guitar (could be covered by hex wrenches, below)

• hex wrenches (like these): https://www.harborfreight.com/36-piece-sae-metric-hex-key-set-94725.html
• small screwdrivers (like these): https://www.harborfreight.com/6-piece-electricians-micro-screwdriver-set-96075.html
• larger screwdrivers, both Phillips and flat
• small adjustable wrench (6 or 8 inch is fine)

• sandpaper grits 320 to 1000 and small sanding block
• 0000 steel wool pads
• fretboard guards (like these): https://www.amazon.com/Fingerboard-Stainless-Luthier-Fretboard-Protector/dp/B07HP23S9V/
• low-stick painters tape two-inch width, and narrower
• electrical contact cleaner (like DeoxIT D5 or F5)
• Nut slotting files (very expensive) or a set of welder tip cleaners (inexpensive)